|
|
fseek (PHP 3, PHP 4, PHP 5) fseek -- Устанавливает смещение в файловом указателе Описаниеint fseek ( resource handle, int offset [, int whence] )
Устанавливает смещение в файле, на который ссылается
handle. Новое смещение, измеряемое в байтах от
начала файла, получается путём прибавления параметра
offset к позиции, указанной в параметре
whence, значения которого определяются следующим
образом:
SEEK_SET - Устанавливает смещение в
offset байт.
|
SEEK_CUR - Устанавливает смещение в
текущее плюс offset.
|
SEEK_END - Устанавливает смещение в
размер файла плюс offset.
(Чтобы перейти к смещению перед концом файла, вы должны передать
отрицательное значение в параметр offset.)
|
Если whence не указан, по умолчанию он
устанавливается в SEEK_SET.
В случае успеха возвращает 0; в противном сучае возвращает -1.
Обратите внимание, что переход к смещению за концом файла не
считается ошибкой.
Пример 1. Пример использования функции fseek() |
<?php
$fp = fopen('somefile.txt');
$data = fgets($fp, 4096);
fseek($fp, 0);
?>
|
|
Не может использоваться на файловых указателях, возвращённых функцией
fopen(), если они используют форматы "http://"
или "ftp://". fseek() также возвращает неопределённый
результат для потоков "дописать в конец" (открытых с флагом "a").
Замечание:
Параметр whence был добавлен в версии PHP 4.0.0.
См. также описание функций ftell() и
rewind().
mhinks at gmail dot com
26-Feb-2007 11:38
Here's a function I wrote to binary search for a line of text within a file, particularly useful when the file is too large to read into memory at once and you want a faster search than linear.
function binary_search_in_file($filename, $search) {
//Open the file
$fp = fopen($filename, 'r');
//Seek to the end
fseek($fp, 0, SEEK_END);
//Get the max value
$high = ftell($fp);
//Set the low value
$low = 0;
while ($low <= $high) {
$mid = floor(($low + $high) / 2); // C floors for you
//Seek to half way through
fseek($fp, $mid);
if($mid != 0){
//Read a line to move to eol
$line = fgets($fp);
}
//Read a line to get data
$line = fgets($fp);
if ($line == $search) {
fclose($fp);
return $line;
}
else {
if ($search < $line) {
$high = $mid - 1;
}
else {
$low = $mid + 1;
}
}
}
//Close the pointer
fclose($fp);
return FALSE;
}
marc dot roe at gmail dot com
19-Aug-2006 09:38
I tried to improve and modify (mail at ulf-kosack dot de)'s function. Actually it is very fast, i.e. requires much less time than to get the last five, ten or whatever lines of a file using file() ore file_get_contents().
function read_file($file, $lines)
{
$handle = fopen($file, "r");
$linecounter = $lines;
$pos = -2;
$beginning = false;
$text = array();
while ($linecounter > 0) {
$t = " ";
while ($t != "\n") {
if(fseek($handle, $pos, SEEK_END) == -1) {
$beginning = true; break; }
$t = fgetc($handle);
$pos --;
}
$linecounter --;
if($beginning) rewind($handle);
$text[$lines-$linecounter-1] = fgets($handle);
if($beginning break;
}
fclose ($handle);
return array_reverse($text); // array_reverse is optional: you can also just return the $text array which consists of the file's lines.
}
The good thing now is, that you don't get an error when your requesting more lines than the file contains. In this case the function will just return the whole file content.
lucky at somnius dot com dot ar
18-Aug-2006 05:35
Jim's (jim at lfchosting dot com) code for the last-line issue is perfect if the file is not empty, or moreover if it has more than one line. However if the file you're using cotains no new-line character at all (i.e. it is empty or it's got one line and only one) the while loop will stuck indefinitely.
I know this script is meant for big files which would always contain at least several lines, but it would be clever to make the script error-proof.
Thus, here's a little modification to his code.
<?php
function readLastLine ($file) {
$fp = @fopen($file, "r");
$pos = -1;
$t = " ";
while ($t != "\n") {
if (!fseek($fp, $pos, SEEK_END)) { $t = fgetc($fp);
$pos = $pos - 1;
} else { rewind($fp); break; } }
$t = fgets($fp);
fclose($fp);
return $t;
}
?>
Lines added and/or modified have been marked with "// ***". I hope this helps!
Regards!
mail at ulf-kosack dot de
27-May-2006 10:44
Here a little extension for the code of ekow.
If you want to read more than one line and more than one file. Some times the last five ore ten lines are interesting in.
You only have to submit a array with filenames and optionally a number of lines you want to read.
<?php
function read_logfiles($files, $lines=5)
{
foreach($files as $file_num => $file) {
if (file_exists ($file) ) {
$handle = fopen($file, "r");
$linecounter = $lines;
$pos = -2;
$t = " ";
$text[$file_num] = "";
while ($linecounter > 0) {
while ($t != "\n") {
fseek($handle, $pos, SEEK_END);
$t = fgetc($handle);
$pos --;
}
$t = " ";
$text[$file_num] .= fgets($handle);
$linecounter --;
}
fclose ($handle);
} else {
$text[$file_num] = "The file doesn't exist.";
}
}
return $text;
?>
ekow[at]te.ugm.ac.id
11-Dec-2005 05:22
A little correction for code to read last line from chenganeyou at eyou dot com.
$linenumber = sizeof($file)-1;
should be
$linenumber = sizeof($contents)-1;
because sizeof will count array element, not file size.
<?php
function readlastline($file)
{
$linecontent = " ";
$contents = file($file);
$linenumber = sizeof($contents)-1;
$linecontet = $contents[$linenumber];
unset($contents,$linenumber);
return $linecontent;
}
?>
jeffunk7 at yahoo dot com
09-Dec-2005 06:46
If you, like me, need the second to last line from a text file (or some other line near the end that you will know the number of, ie the fourth to last line) then this addition to Jim's code can help you.
//$linefromlast is the linenumber that you need, the last line being 1, the second to last being 2, and so on...
function readlog($file, $linefromlast){
$fp = @fopen($file, "r");
$pos = -2;
$t = " ";
$linecounter = 1;
while ($t != "\n" and $linecounter<=$linefromlast) {
fseek($fp, $pos, SEEK_END);
$t = fgetc($fp);
$pos = $pos - 1;
if ($t == "\n" and $linecounter < $linefromlast) {
fseek($fp, $pos, SEEK_END);
$t = fgetc($fp);
$pos = $pos - 1;
$linecounter = $linecounter +1;
}
}
$t = fgets($fp);
fclose($fp);
return $t;
}
memphis
22-Jul-2005 01:41
Actually chenganeyou, your function causes the entire file to be read into an array, and then you look at the last element of the array. While this works fine for a small file, an sizeable file is going to suck down memory and time. Using a 15 MB file your function took around 2 secs to return.
The function provided by Jim goes directly to the end of the file and only reads in that line. I had to set the offset ($pos) to -2 for it to work in my case however. Using the same 15 MB file this function returns immediately.
chenganeyou at eyou dot com
27-Jun-2005 01:35
I use the following codes to read the last line of a file.
Compared to jim at lfchosting dot com, it should be more efficient.
<?php
function readlastline($file)
{
$linecontent = " ";
$contents = file($file);
$linenumber = sizeof($file)-1;
$linecontet = $contents[$linenumber];
unset($contents,$linenumber);
return $linecontent;
}
?>
phil at NOSPAM dot blisswebhosting dot com
25-May-2005 08:43
In order to read a text file from end->beginning e.g display the most recent contents of a log file first. I use the following.
It basically just uses fseek to find the end of the file, ftell to find the byte count for a counter, then iterates backwards through the file using fgetc to test for the newline charater.
$i=0 ;
$lines=500 ;
$fp = fopen($log,"r") ;
if(is_resource($fp)){
fseek($fp,0,SEEK_END) ;
$a = ftell($fp) ;
while($i <= $lines){
if(fgetc($fp) == "\n"){
echo (fgets($fp));
$i++ ;
}
fseek($fp,$a) ;
$a-- ;
}
}
alan at peaceconstitution.com
17-May-2005 06:03
Thanks to Dan, whose above comment provided a key to solve the issue of how to append to a file.
After, using phpinfo(); I made sure my installation of PHP had the requisite settings mentioned in the text to the manual entry for fopen(), I was puzzled as to why my use of fopen() with the append option 'a' (append option) didn't work. Then I read a comment contributed to Appendix L (http://us2.php.net/manual/en/wrappers.php) that the append option 'a' for fopen() doesn't work as expected. The writer suggested using the 'w' option instead, which I found did work. But the 'w' option (write option) overwrites everything in the file.
The question remained how to accomplish appending. Following Dan's suggestion about the 'r+' option, I tried this, which works fine:
$string = "Message to write to log";
$filehandle = fopen ("/home/name/sqllogs/phpsqlerr.txt", 'r+');
fseek ( $filehandle,0, SEEK_END);
fwrite ( $filehandle, $string."\n" );
fclose ($filehandle);
Lutz ( l_broedel at gmx dot net )
14-Feb-2005 02:25
Based on the function below, provided by info at o08 dot com (thanks), the following should enable you to read a single line from a file, identified by the line number (starting with 1):
<?
function readLine ($linenum,$fh) {
$line = fgets ($fh, 4096);
$pos = -1;
$i = 0;
while (!feof($fh) && $i<($linenum-1)) {
$char = fgetc($fh);
if ($char != "\n" && $char != "\r") {
fseek($fh, $pos, SEEK_SET);
$pos ++;
}
else $i ++;
}
$line = fgets($fh);
return $line;
} //readLine()
?>
info at o08 dot com
15-Feb-2004 11:27
I think the function should be as following to deal any combination of cr & lf, no matter the line ends by cr, lf, cr-lf or lf-cr:
<?php
function getline ($handle) {
while (!feof($handle)) {
$char = fgetc($handle);
if (($char == "\n") or ($char == "\r")) {
$char2 = fgetc($handle);
if (($char2 != "\n") && ($char2 != "\r")) {
fseek ($handle,-1,SEEK_CUR);
}
break;
}
else {
$buffer .= $char;
}
}
return $buffer;
}
?>
jim at lfchosting dot com
04-Nov-2003 06:03
Here is a function that returns the last line of a file. This should be quicker than reading the whole file till you get to the last line. If you want to speed it up a bit, you can set the $pos = some number that is just greater than the line length. The files I was dealing with were various lengths, so this worked for me.
<?php
function readlastline($file)
{
$fp = @fopen($file, "r");
$pos = -1;
$t = " ";
while ($t != "\n") {
fseek($fp, $pos, SEEK_END);
$t = fgetc($fp);
$pos = $pos - 1;
}
$t = fgets($fp);
fclose($fp);
return $t;
}
?>
aspyrine at hotmail dot com
11-Mar-2003 07:51
If you want to go to the end of a socket stream with fseek() you'll get the following error :
"stream does not support seeking"
feof() wont work eiver in a stream (ie. smtp)
You can move the pointer to the end with this command :
while(fgetc($fp)) {}
...so easy :-)
16-Sep-2002 01:25
Don't use filesize() on files that may be accessed and updated by parallel processes or threads (as the filesize() return value is maintained in a cache).
Instead lock the opened file and use fseek($fp,0,SEEK_END) and ftell($fp) to get the actual filesize if you need to perform a fread() call to read the whole file...
24-Aug-2002 05:12
The following call moves to the end of file (i.e. just after the last byte of the file):
|
|
fscanf
